Flow Management Technologies

Valves

Doubrava’s two-way valves are used to regulate the flow of bulk materials and powders. They are very robust and require little maintenance.

Doubrava’s valves can be adapted easily to suit their operating conditions and are available as either pneumatically- or electrically-driven models. Custom symmetrical and asymmetrical designs are also available, as are three-way valves.

Advantages:

Robustness
Little maintenance required
Dust-tight
Simple to install
Simple to use
Customer-specific solutions

Extras:

Proximity switch
Use of different materials
Wear-resistant reinforcing
Manual lever

2-Way Valve
Inlet Flange

Type
I/300	470	430	135	300	500	560	1 x 200	2 x 200
I/400	570	530	135	400	500	560	2 x 150	2 x 200
I/600	770	730	135	600	500	560	2 x 250	2 x 200
I/800	970	930	135	800	500	560	2 x 350	2 x 200
I/1000	1170	1130	135	1000	500	560	3 x 300	2 x 200
II/300	490	450	145	300	600	660	1 x 200	2 x 250
II/400	590	550	145	400	600	660	2 x 150	2 x 250
II/600	790	750	145	600	600	660	2 x 250	2 x 250
II/800	990	950	145	800	600	660	2 x 350	2 x 250
II/1000	1190	1150	145	1000	600	660	3 x 300	2 x 250
III/300	490	450	145	300	600	660	1 x 200	2 x 250
III/400	590	550	145	400	600	660	2 x 150	2 x 250
III/600	700	750	145	600	600	660	2 x 250	2 x 250
III/800	990	950	145	800	600	660	2 x 350	2 x 250
III/1000	1190	1150	145	1000	600	660	3 x 300	2 x 250

2-Way Valve
Outlet Flange

Type
470	450	85	75	370	350	600	430	410	540	350	2 x 150	1 x 300
570	450	85	75	470	350	600	530	410	540	350	2 x 200	1 x 300
770	450	85	75	670	350	600	730	410	540	350	2 x 300	1 x 300
970	450	87,5	75	870	350	600	930	410	540	350	3 x 265	1 x 300
1170	450	85	75	1070	350	600	1130	410	540	350	4 x 250	1 x 300
490	400	95	75	390	300	500	450	360	440	250	2 x 150	1 x 250
590	400	95	75	490	300	500	550	360	440	250	2 x 200	1 x 250
790	400	95	75	690	300	500	750	360	440	250	2 x 300	1 x 250
990	400	97,5	75	890	300	500	950	360	440	250	3 x 265	1 x 250
1190	400	95	75	1090	300	500	1150	360	440	250	4 x 250	1 x 250
490	500	95	100	390	400	200	450	460	140	100	2 x 200	1 x 300
590	500	95	100	490	400	200	550	460	140	100	2 x 200	1 x 300
790	500	95	100	690	400	200	750	460	140	100	2 x 300	1 x 300
990	500	97,5	100	890	400	200	950	460	140	100	3 x 265	1 x 300
1190	500	95	100	1090	400	200	1150	460	140	100	4 x 250	1 x 300

3-Way Valve

Type
350 x 300	300	1 x 200	440	480	380
350 x 400	400	1 x 300	540	580	480
350 x 700	700	2 x 300	840	880	780
350 x 1000	1000	3 x 300	1140	1180	1080

Type 350 x 1000 requires pneumatic cylinders on both sides

Gates

Doubrava’s flat gates are designed for cutting off flows underneath silos, hoppers, etc. Their outer casing is dust-tight and they are particularly suited for fine materials and powders as well as granules.

The Following Models are Available:

Trapezoidal screw drive with hand wheel
Pneumatically-driven with 5/2-way valve
Electrically-driven

Doubrava’s gates are used to cut off gravity-driven flows. They are designed to allow the entire opening to be used.

Advantages:

Wear-resistant
Simple to use
Simple to install
Little maintenance required
Low installation height

Extras:

Proximity switch
Use of different materials

Technical Data

Type
500/500	505	500	475	440	4 x 115	50	50	610	1504	1305	680
400/400	405	400	375	340	3 x 110	65	65	510	1105	1105	580
350/350	355	350	325	290	2 x 145	60	60	460	1005	1005	530
300/300	305	300	275	240	2 x 120	60	60	410	905	905	480
250/250	255	250	225	190	2 x 105	50	50	360	805	805	430
200/200	205	200	175	140	1 x 140	60	60	310	705	705	380

Search

Contact

Valves

2-Way Valve
Inlet Flange

2-Way Valve
Outlet Flange

3-Way Valve

Gates

The Following Models are Available:

Technical Data

About Us

Turnkey Solutions & Industrial Services

Markets

Quick Links